How to Overclock Your Graphics Card Safely

Graphics card is an hardware, It is used extend the video memory of the pc, increase the quality of high-definition. It makes the PC More powerful and provides it the capability to lot of high-level works. The standard of the image depends on the standard of the graphics card. it's substantially vital for gambling and video redaction on a computer.



Clean before overclock Graphics Card


You Before you start to overclock Your graphics card, Make Sure that graphics card condition because Overclocking causes Decrease Your graphics card life of use. So Make Sure Your graphics card condition.


Software Need For Overclock

  • MSI Kombustor

  • MSI Afterburner

To Download MSI Kombustor From Official Website Click Here

To MSI Afterburner From Official Website Click Here


MSI Kombustor



MSI Kombustor is MSI's exclusive burn-in benchmarking tool supported the well-known FurMark computer code. This program is specifically designed to push your graphics card to the boundaries to check stability and thermal performance. Kombustor supports leading edge 3D Apis like OpenGL or Vulkan.


MSI Afterburner


MSI afterburner is a software who own their graphics card and this application helps to overclock and change all default setting in their graphic card. In Additionally, each graphics card will give different levels of performance, so it may not be worth the time to clock some at all. However, since overclocking your GPU will almost assuredly give you better FPS and performance in games, it's worth it for most gamers.


Come To the Point !


Every graphics card have different different overclocking setting So You Should correctly Setting the graphic card porformances Level

MSI Kombustor




  • Before you begin, it is a smart plan to benchmark your system, therefore you'll guarantee it's stable at its out-of-the-box clock speeds. this may additionally offer you a plan of what quantity performance you gained once all is claimed and done, that may be a nice bonus.


  • Fire up Superposition and select an possibility from the planned menu. try and select one thing around or on top of the settings at that you'd run most games. you would like Superposition to push your graphics card to 100%, while not running at a dismally low frame rate—1080p High or Extreme most likely is not a foul selection for many trendy cards. make sure to disable Vsync, since you do not wish your frame rate bolted to your monitor's refresh rate.


  • Then, click the massive black Run button. it's going to play through a series of scenes, which can take regarding 5 minutes. you will see performance data within the corner, together with clock speed, frame rate, and temperature.


  • If you are employing a newer card, you will notice your clock speed unsteady over the course of the benchmark. trendy AMD and Nvidia cards regulate the boost clock supported the card's temperature and power usage, primarily self-overclocking to a precise degree if they see there's additional headroom.


  • However, manually overclocking your card will push these boost clocks even higher, pushing performance additional than your card’s constitutional limits. therefore don't fret regarding this an excessive amount of if you’re a beginner—just apprehend that your clock speeds can fluctuate, and that is okay.



  • In addition, watch your temperatures because the benchmark runs. you will not essentially see them get super high on this 1st pass, however they're going to increase as you begin overclocking and you do not wish it to induce too hot. Some auto-boosting cards can graciously back themselves down from their most boost clocks, therefore i like to recommend overclocking along with your fans at 100 percent to eliminate temperature as a variable throughout the method (you will continuously flip them go into reverse later).


  • Older cards aren’t quite as sensible regarding strangulation down, and you’ll wish to overclock with no matter fan management you propose on victimisation long-run, and avoiding overclocks that cause your temperature to succeed in on top of the mid-80s.


  • Once the benchmark is finished, you will see a final record book. Write down the minimum, maximum, and average frame rates from that record book, furthermore because the benchmark score if you therefore desire—and keep an eye fixed on your temperatures because the benchmark runs.

MSI Afterburner



Increase Your Core Clock and Re-Benchmark


Ready to begin pushing? Open MSI afterburner (or your overclocking tool of choice), and push the facility Limit slider all the high. Set the Temperature Limit slider to no matter you would like (the most is typically okay, although if you are notably cautious, you'll move it a bit lower).


Then, boost your Core Clock by concerning 10MHz. Click the Apply button, and run Superposition once more. remember to stay an eye fixed on those temperatures, and guarantee there are not any artifacts (weird lines, boxes, or static that flash on the screen) because the benchmark runs. Once it's done, write down your frame rates and raise the Core by 10MHz once more. Keep continuance this method, boosting and benchmarking, till you run into problems.


At a particular purpose, the benchmark can fail—either it'll crash, or you will see artifacts flash across the screen because it runs. once that happens, revive your laptop. (This is important: once a crash, Superposition can ignore your set clock speeds and come to stock till you revive.)


If you would like, you'll stop here: come to your last stable clock speed and move all the way down to Step four. however if you are willing to push it a bit farther, there square measure many different belongings you will do.


Increase Your Voltage and Memory Clock (Optional)



  • If your temperatures are still among the safe vary, you will be ready to push your card a touch farther by increasing the voltage. this will give higher stable clock speeds, betting on the cardboard.

  • To do this, open Afterburner's settings and, underneath the final tab, check the Unlock Voltage management and Unlock Voltage watching boxes. Set the voltage management drop-down to 3rd Party, and click on OK. a replacement slider ought to show up in Afterburner's main window: Voltage.

  • If this slider measures voltage , then you'll be able to increase the voltage provided to the cardboard. If, like on several new Nvidia cards, it shows a p.c price, i like to recommend feat this alone, because it won’t really increase the quantity of voltage you'll be able to access.

  • For cards that support it, bump this up by 10mV approximately, and run your benchmark once more. If you do not expertise crashes, you'll be able to strive increasing the Core Clock more. Push the voltage up a touch additional anytime your Core Clock becomes unstable.

  • This is wherever you wish to pay particularly shut attention to those temperatures, since increasing the voltage will manufacture additional heat. analysis your card to work out its most safe voltage to make sure you do not harm your hardware.

  • Once you have reached a stable Core Clock, you'll be able to additionally increase your Memory enter a lot of constant manner. Push it up by 100MHz approximately, run your benchmark, and repeat the method such as you did with Core Clock.

  • Overclocking your memory too so much might not invariably manufacture artifacts or crashes—sometimes, it’ll simply decrease performance thanks to your memory’s error correction. wait for crashes and a decrease in frames per second, and stop increasing the Memory Clock once that happens.

Then What is Next Ready To Play


Now Your PC Ready for Action

If You Want High-end Games, Free and Highly Compressed Click Here.

1 view0 comments